Sense cables

FG-OD: Addressable Oil Sense Cable

• FG-OD is a digital sense cable for detection and location, along the entire length, of liquid hydrocarbons and liquid insoluble in water present on the cable.
• It allows multiple leak detection and location thanks to independent digital addressing, enabled by an embedded microchip in each FG-OD sense cable.
• Fast response.
• Re-usable after leak detection.
• Can be installed in a humid environment, as it is insensitive to water and inorganic contamination.

FEATURES

• Standard length (9, 22, 39 and 65 ft) sensor sections or long line section allowing optimized system architecture.
• A microprocessor embedded in each FG-OD sense cable allowing independent digital transmission to the alarm unit.
• Standard length sense cable provided with built-in plug-socket connector.
• Long line provided with built-in intermediate embedded connections (for each section), plus connector at extremities on demand. Structure of the sense cable comprising a silicon sensing wire, a continuity wire, a communication wire (proprietary bus) and the power supply wires.
• Protective external PE braid built on the cable. Intrinsically safe – can be used in classified areas: Ex ia IIB T4 Ga (IECEx “Zone 0”).

BENEFITS

• Reliable detection:
  – Sensitive to liquid hydrocarbons.
  – Insensitive to water, inorganic pollutants and external loads (pressure).
• Examples of detection time: Gasoline: 3-6 minutes (*), Diesel Oil: 25-35 minutes (*), Jet Fuels: 10-20 minutes (*).
• Detects and locates hydrocarbon leaks on the section length.
• Can be reused, allowing leak detection tests under real conditions.
• The same unit FG-NET can be connected to FG-OD sense cables and mixed with water or acids/bases sense cables at the same time.
• Easy to install and remove: standard FG-OD cables pre-connected with male / female connectors.

(*) : depending on liquid composition and leak conditions