Sense Cables

FG-EC Water Leak Detection Sense Cable

The FG-EC sense cable detects and pinpoint locates water leak & base liquid leak at any point along the cable. It is designed to be connected to FG-SYS, FG-NET and FG-BBOX. The typical applications are data centres, trading floors, high value and mission-critical infrastructure.

Each FG-EC sense cable is made with special Low Smoke Zero Halogen (LSZH or LS0H) materials, it emits limited smoke and no halogen when exposed to high sources of heat.

Features

• Available in standard and pre-connected lengths of 9, 22 and 49 ft. They can be interconnected to provide an expandable network of leak detection.
• Each FG-EC sense cables contain an embedded microprocessor, it intelligently monitors the cable status, it provides continuous real-time communication to the TTK digital units.
• Each cable has high visibility LED to provide quick green/red identification of the cable status:
  • Green LED: normal status, no alarm raised;
  • Red LED: leak detection on the cable;
  • LED off: cable break on this or any upstream cable.
• Small diameter, light, flexible and in an easily identifiable light blue colour.
• Ingenious design: 4 wires of helical construction, compressed and connected on an extruded central core, insensitive to dust and metal particle contamination, preventing false alarms.
• Fixing clips available to fasten the sense cables.
• A set of TTK BUS 8723 jumper cables and connection accessories gives continuity to each circuit.

Benefits

• Detects and pin-points the location of a water/base leak to the nearest metre along the length of the cable.
• Detects and localizes cable break on the cable.
• Short drying time.
• The FG-EC sense cable is a non-absorbent design that can be reused after leaks, reducing the maintenance costs.
• Easy installation with pre-finished male and female connectors.
• Flexible design: in both liner and sector mode (via FG-DTC box).